-
UL 2594 AC Level 2 EV Charger 50A Wall Mount
Pheilix UL 2594, SAE J1772 standard AC Level 2 EV Charger series designed with intelligent integrated solution based on high level security and electrical performance. Pheilix electric vehicle chargers are not only a EV charging device , It is also associated with the Solar system , Battery pack(Energy storage system) and other family devices system. Pheilix team independently developed the OCPP1.6Json network platform and App system. From UL 2594 SAE J1772 standard charging control modules to complete EV charging units to Network platform and App , Pheilix provides a One-stop EV charging sloution to different customers .
he Pheilix charger has a built-in energy meter, so some local utilities may not require the installation of a second meter.
● Monitors energy usage and demand
● Provides certified energy and metered demand response, so it can support electric utility electric vehicle billing when certified to ANSI C12.20 and IEC standards (if supported by your local electric utility)
● Supports energy usage data evaluationFlexible communications
Blink has many ways to connect to the Internet:
● Ethernet Local Area Network (LAN)
● IEEE 802.11b/g (Wi-Fi) ● Cellular ModemSafety
Pheilix safety features:
● Compliant with UL 2594 – Electric Vehicle Supply Equipment.
● Will not dispense power unless the connector is properly latched in the vehicle’s inlet –with an audible click.
● Communicates with your vehicle when the Pheilix connector is plugged into the vehicle inlet, so the vehicle will not drive until the connector is unplugged.
● Turns off the charging power if the Pheilix connector or cable is subjected to excessive strain.
● Contains a charge circuit interrupting device (CCID) and a ground monitoring circuit.
● Meets all National Electric Code and UL requirements related to electric vehicle charging systems.
● Restarts automatically after a power outage.
● Provides adjustable output current to support electric utility demand response requests, where available (and with your permission).
● Complies with the Americans with Disabilities Act (ADA), and can be installed in a variety of configurations to meet your needs. -
EUStandard Economy Version EV Charger (Wall Mount) 7Kw, 11Kw, 22Kw
Pheilix economy version EV chargers compliant with the IEC 61851 standard. The series products was independently developed and designed with intelligent integrated solution based on high level security and electrical performance. The economy series EV chargers are CE/TUV /CB approved with high level security functionalities such as earth leakage protection , Over/under voltage , Over current , Over temperature … The enclosure designed with stainless and IP65 protection, Available for both indoor and outdoor installation.
-
Solar Panel Glacier Series
Solar modules, also known as solar panels, are made up of several photovoltaic (PV) cells that capture the sun’s energy and convert it into electricity. These cells are typically made of silicon or other semiconducting materials, and they work by absorbing photons from sunlight, which releases electrons and creates an electrical current. The electricity generated by solar modules is a form of direct current (DC), which can be converted into alternating current (AC) using inverters so that it can be used in homes and businesses.
The efficiency of solar modules varies depending on several factors, including the type of PV cells used, the size and orientation of the panel, and how much sunlight is available. In general, solar panels are most efficient when they are installed in areas with maximum sun exposure and minimal shading.
Solar modules are typically installed on rooftops or in large arrays on the ground, and they can be connected in series to produce higher voltage and wattage outputs. They are also used in off-grid applications, such as powering remote homes or water pumps, and in portable devices such as solar-powered chargers. -
On Grid/Hybrid Inverters
On-grid inverters, also known as grid-tied inverters, are designed to work with solar panel systems that are connected to the electrical grid. These inverters convert the DC (direct current) electricity generated by the solar panels into AC (alternating current) electricity that can be used by household appliances and fed into the grid. On-grid inverters also allow excess electricity generated by the solar panels to be sent back to the grid, which can result in net metering or credit from the electricity provider.
Hybrid inverters, on the other hand, are designed to work with both on-grid and off-grid solar panel systems. These inverters allow the solar panels to be connected to battery storage systems, so that excess electricity can be stored for later use rather than being sent back to the grid. Hybrid inverters can also be used to power household appliances when there is a power outage on the grid or when the solar panels are not generating enough electricity to meet the household’s needs.
-
51.2V 100Ah 5KWh /51.2V 200Ah 10KWh Battery Pack for Residential Solar System
Pheilix Solar battery are a relatively new technology that has gained popularity in recent years due to their ability to store solar energy for later use. They work by converting and storing solar energy during the day and releasing it as electricity when needed.
The Pheilix Home energy storage systems allow homeowners to store excess energy generated by their solar panels or wind turbines for use during high demand times or when there is no energy available. Additionally, they can provide backup power during blackouts or grid failure.
1. Long cycle life reduces cost of average life expectancy
2. Maintenance -free brings lower cost
3. The operation temperature range is wide
4. Intelligent Battery Management System
5. The battery will not be burnt or exploded in case of acupuncture, baking and other extreme statues -
Lysaght Klip-lok 406 & 700 Mounts
CHIKO 406 & 700 Clamp is designed for Lysaght Klip-lok 406 and 700 roofings. The smart design allows for easy and fast installation.
Features:
● Enable fast, simple and cost-effective installation
● Al6005-T5. High class anodized aluminium
● Waterproof EPDM rubber integrated
-
Tile Roof Mount CK-TR Series
CHIKO S Tile Hook, different options offered to install on top of roof and side of roof rafter. Also, the hook can be side mount or top mount.
Features:
● Enables simple, fast and cost-effective installation
● Made of SUS 304
● Highly corrosion resistant surface treatment
● Fasteners and rail nut configured to
extra parts purchasing fully save -
Asphalt Shingles Mounting CK-AR Series
This flushing matches CHIKO L feet, supplying the best solution for Asphalt Shingles.
Features:
● Flashing and L foot made of 100% aluminum
● Waterproof EPDM rubber integrated
● Enables easy, fast and cost-effective installation
● Fasteners and rail configured to
● extra parts purchasing
-
Stand Off Mount CK-SO Series
The CK-SO StandOff mount is the simplest and most cost effective way to install solar PV on asphalt shingles roofs and other flat roof surfaces. The aluminum base has a super strong foundation to supports the standoff posts for tile from 60-152mm.
Features:
● Strongest off-the-shelf mechanical mount
● Sealing rubber gasket
● Easy to add height with extensions or all-threads
● 2 fasteners attaches to roof structure, more stronger.
-
Adjustable Tile Roof Mounting CK-SR Series
CHIKO Adjustable S Tile Hook can be adjusted horizontally and vertically, which gives more versatility than regular S Tile Hook.
Features:
● Enable fast, simple and cost-effective installation
● Made of SUS 304
● Highly corrosion resistant surface treatment
● Fasteners and rail nut configured fully, to save
installation time and purchasing extra parts -
Flat Tile Roof Mounting CK-FT Series
CHIKO Flat Tile Hook offers the best and easiest solution for installation on a slate, cement or flat tile roof.
Features:
● Enable fast, simple and cost-effective installation
● Made of SUS 304
● Highly corrosion resistant surface treatment
● Fasteners and rail nut configured fully, to save
installation time and purchasing extra parts -
Roman Tile Mounting CK-RT Series
This hook is adjustable and is perfect for roman tiles, concrete tiles and shingle rooftops
Features:
● Bottom carrying of rail achieved easily by side fastening
● Module oerrientation swithed easily by rotatable adapter
● Made of AL 6005-T5
● High-class surface anodizing
● Pre-assembled
● Height adjustable