product
UL 2594 AC Level 2 EV Charger 50A Wall Mount
The Max 50A input current designing and the high level security and performance makes the clients day-to-day vehicle charging experience convenient and cost effective. Its software is intuitive and user-friendly, making the Pheilix EV charging system easy to set up and easy to use.
Competitive Benefits
Physical Specifications
Internal energy meter
The Pheilix charger has a built-in energy meter, so some local utilities may not require the installation of a second meter.
● Monitors energy usage and demand
● Provides certified energy and metered demand response, so it can support electric utility electric vehicle billing when certified to ANSI C12.20 and IEC standards (if supported by your local electric utility)
● Supports energy usage data evaluation
Flexible communications
Blink has many ways to connect to the Internet:
● Ethernet Local Area Network (LAN)
● IEEE 802.11b/g (Wi-Fi) ● Cellular Modem
Safety
Pheilix safety features:
● Compliant with UL 2594 – Electric Vehicle Supply Equipment.
● Will not dispense power unless the connector is properly latched in the vehicle’s inlet –with an audible click.
● Communicates with your vehicle when the Pheilix connector is plugged into the vehicle inlet, so the vehicle will not drive until the connector is unplugged.
● Turns off the charging power if the Pheilix connector or cable is subjected to excessive strain.
● Contains a charge circuit interrupting device (CCID) and a ground monitoring circuit.
● Meets all National Electric Code and UL requirements related to electric vehicle charging systems.
● Restarts automatically after a power outage.
● Provides adjustable output current to support electric utility demand response requests, where available (and with your permission).
● Complies with the Americans with Disabilities Act (ADA), and can be installed in a variety of configurations to meet your needs.
Physical Specifications
| Housing case | Plastic |
| Mounting Location | Outdoor /Indoor (permanent mounting) |
| Charging Model | Level 2 (UL 2594 ) |
| Charging Interface Type | IEC62196-2 Type1/ SAEJ 1772 |
| Charging current | 16A-50A |
| Display | RGB Led indicator as standard |
| Operation | App monitoring +RFID cards as standard |
| IP Grade | IP65 |
| Operation Temperature | -30°C ~ +55°C |
| Operation Humidity | 5% ~ 95% without condensation |
| Operation Attitude | <2000m |
| Cooling method | Natural air cooling |
| Enclosure Dimensions | see Technical data |
| Weight | see technical data |
Electrical Specifications
| Model | EVC-50T/S |
| Input Voltage | 208-240 VAC ±10%(120 VAC to GND) |
| Input Frequency | 60Hz |
| Input Phase | Single (3 -wire) |
| Output Voltage | 208-240 VAC ±10%(120 VAC to GND) |
| Output Current | 16-50A |
| Output Phase | Single |
| Pilot | SAE J1772 compliant |
| Grounding protection | √ |
| Independent energy meter | √ |
| Independent AC Contactor | √ |
| Emergency Stop | √ |
| Solenoid locking mechanism | √ |
Security Specifications
| Welded contacts detection | √ |
| Over-voltage Protection | √ |
| Under-voltage protection | √ |
| Overload protection | √ |
| Over current protection | √ |
| Short Circuit protection | √ |
| Earth leakage protection A+6mADC | √ |
| Type A rcmu on PE wire (new version) | √ |
| Ground protection | √ |
| Over-temp protection | √ |
| Double Isolation | √ |
| Auto Test | √ |
| Anti-tamper alarming | √ |
OCPP1.6 Platform Network and App Specifications
| OCPP1.6 Protocol Management Platform | √ |
| Sub-management Accounts for Operators | √ |
| Customized LOGO and Advertisement on Platform | √ |
| Ios & Android App System | √ |
| Unlimited Function to Divided into sub-App system | √ |
| App Management Web Accounts for Operators | √ |
| Independent App system (Customized LOGO and advertisement) | √ |
| Ethernet/RJ45 Connection Interface as standard | √ |
| Wifi Connectivity as standard | √ |
| RFID functionality for off-line as standard | √ |
| Smart charge App Monitoring | √ |
| Total Power App Monitoring | √ |
| Dynamic Load Balancing | √ |
| Solar Power App Monitoring | Optional |
| Battery Bank App Monitoring | Optional |
| Payment by credit cards | Commercial version |
| Payment by RFID cards | Commercial version |
| Solar+Battery+Smart Charge All- In- One | Optional |
The Pheilix OCPP1.6J Platform Network
The Pheilix Network supports the entire Pheilix family, including your home unit, public chargers, and DC Fast Chargers, where available. With its two-way Internet communications and dedicated network operations center, the Pheilix Network is designed to both grow and change to meet the needs of electric vehicle and plug-in hybrid electric vehicle owners.
The Pheilix Network includes:
● The independent OCPP1.6 platform management account , providing friendly, near real-time access to manage the chargers.
● The independent APP web management account , providing friendly, near real-time access to set or manage the advertisement by customers themselves.
● Automatic firmware updates, so your Pheilix charging station can be updated when new capabilities and functionality become available.
● RFID Card management, so you can use public charging stations.
● 24x7 Contact Center with live customer support.
● Secure, high-availability infrastructure and software technologies that ensure that your information is always safe from others and available to you.
To see the Pheilix Network membership options, please visit www.pheilix.com.
